Latest electric discharge machine Tenders | Government electric discharge machine Tenders

CTN :45286280

11 Jun, 2026 NA

Chakeri - Uttar Pradesh

Tender For expression of interest for electrical discharge machine

Central Government/Public Sector

CTN :45254777

22 Jun, 2026 NA

Jodhpur - Rajasthan

Tender For supply of led based driver and assistant driver desk illumination lamp. technical specification:- 1) operating voltage 18 to 30v dc, with nominal voltage of 24v dc. 2) high and low glow switch has to be provided. 3) the lamp unit shall have in built reverse polarity, over voltage trip, spike & surge protection. 4)mechanically the housing shall be as per clw specification no. clw/es/3/0042 alt d or latest with reference date as tender closing date. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ] ]

Central Government/Public Sector

CTN :45264914

30 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of 2.2 kw ac crane drive , 5.5 kw ac crane drive , 11.0 kw ac crane drive , 22.0 kw ac crane drive , 37.0 kw ac crane drive , 55.0 kw ac crane drive , 75.0 kw ac crane drive 3 phase, digital ac crane drive 2.2 kw, ac drive should be suitable for heavy duty operation of 2.2 kw. offered ac drive should be suitable for crane-hoist operation. if, separate software required for crane application, it must be clubbed with supply of material. ac input voltage: 380 to 480v ac 10%, 3 phase, 3 wire, 50 hz; mode of control: bi-directional fully controlled 3-phase ac; speed regulation: 1% of base speed; braking: suitable dynamic braking resistance and chopper unit (external or in-built); acceleration time: 0.1 to 1000s or better; deacceleration time: 0.1 to 1000s or better; overload: 150%-1min, 200%-3.0s; ambient temperature: 0 to 50 c (derating shall not occur below 50 c. in the event that derating occurs below 50 c, the supplier shall provide a higher-rated drive to match the requirement); rated current at 50 c: min. current should be 5.5 amps at 50 c; high starting torque at low speed: 200% starting torque at 0.3 hz; two analog inputs: two nos. analog inputs having signal voltages of 0 to 10 vdc or 4 to 20 ma (configurable); two analog outputs: two nos. analog outputs having signal voltages of 0 to +/-10 vdc or 4 to 20 ma (configurable); six digital inputs: pnp/npn; one relay output: with short-circuit and overload protection; two digital outputs: with short- circuit and overload protection; brake release signals: outputs braking signals based on inverter operating conditions to prevent cargo bed rollback and overrunning; load adaptive control: when the actual load level is lower than the configured load level, the system can be operated at a ratio-multiplied speed (in terms of the configured frequency), resulting in significantly better efficiency; load ) /bid number : gem/2026/b/7563714 * /dated: 20-05-2026 & & / bid document 1 / 29 frequency), resulting in significantly better efficiency; load limiter: maintains the safety and rescuability of suspended loads by stopping when excessive torque is detected and by allowing operation only in the direction opposite to that in which the excessive load was detected; cooling capacity degradation alarm: detects and displays cooling capacity drop due to cooling fin clogging caused by dust and cooling fan airflow reduction; igbt life expectancy forecasting: estimates the power cycle life expectancy of the main circuit s igbt semiconductor device temperature due to frequent acceleration and deceleration stoppages, and displays the estimate before the design life is reached; protection: it must have all standard protections like stall protection, instantaneous power failure, single phasing, over voltage, under voltage, over current, inverter overload, thermal overload etc; display console: it must have alpha numeric display console for programming of drive, fault display and operating condition; dynamic qr code: it must have dynamic qr code for trouble shooting; tuning facility: it must have auto tuning facility. this must enable perfect matching of motor coupled to load with regards to optimum acceleration time, deceleration time, speed regulation etc; drive programming software: suitable drive programming software along with necessary connecting cable and adapter for connection with laptop and drive should be provided to get online with the offered drive (laptop not in scope); automatic voltage regulation: it must have automatic voltage regulation function to maintain high starting torque even at reduced voltage; regenerative option: it must be capable of regenerative operation; communication protocol: modbus (rtu/serial) or ethernet (tcp/ip); make of drives: fuji- electric/yasakawa/schneider/abb only; suitable dynamic breaking resistance unit of 60% wattage rating of drive, however the value of resistance is to be decided by manufacturer as per their technical manual for crane-ho

State Government

CTN :45007453

18 May, 2026 5.00 Lacs

Bhopal - Madhya Pradesh

Tender For supply of electric & bhawan items supply- led bulb 9 watt, led bulb 15 watt, led bulb 20 watt, paint brushes (sizes: 4, 6, 8, 10 inches), cfl 85 watt, complete street light (cfl 85 watt) - waterproof, complete street light (cfl 36 watt) - waterproof, street light (led flood light 30 watt) - waterproof, street light (led flood light 50 watt) - waterproof, street light (led flood light 80 watt) - waterproof, street light (led flood light 100 watt) - waterproof, tube light rod 40 watt, tube light electronic choke 40 watt, tube light starter 25 watt, tube light holders (collar type), complete tube light fitting, cfl holder, computer extension board, standard bulb (incandescent), copper wire bundle 1.0 mm (multi-strand), copper wire bundle 2.5 mm (multi-strand), copper wire bundle 1.5 mm (multi-strand), copper wire bundle 12 mm (multi-strand), copper wire bundle 16 mm (multi-strand), aluminum wire bundle 1.5 mm, aluminum wire bundle 2.0 mm, aluminum wire bundle 12 mm, aluminum wire bundle 16 mm, on/off switch, 2-pin socket, 3-pin socket, 5-pin socket, power board, power plug 16 amp, pliers, voltage tester, led rechargeable torch 6 watt (high intensity), led rechargeable torch - 10 watt (high intensity), paint (all colors), turpentine oil, distemper (all colors), varnish (all colors), torch batteries, cement (in 50 kg bags), white cement (in 25 kg bags), oil paint, iron primer, waterproofing (damp-proof paint), motor starter (complete unit), ceramic tiles (16 x 16), tiles (12 x 12), tiles (8 x 12), tiles (18 x 12), vitrified tiles (2 x 2), toilet seats (various sizes, with flush mechanism), washbasin (complete unit), male urinal (complete unit), female urinal, grinding millstones (chakki paat), hinges (sizes: 3", 4", 5", 6"), electrical tape, steel measuring tape (5 meters), large mortar pans (tagadi) - various sizes, pickaxe (with handle), shovel/spade (with handle), trowel (small & large), steel wire brush (4", 5", 6"), plastic water tap/faucet, iron water tap/faucet, white putty (in 25 kg bags), water storage tank (500 liters), water storage tank (1000 liters), black sand, river sand, gravel/crushed stone, stone dust, bricks (standard/clay), bricks (cement), 65 mm pipe, 65 mm pipe fittings (elbows, sockets), iron mosquito mesh (sold by running foot; widths: 3', 4', 5', 6'), steel mosquito mesh (sold by running foot; widths: 3', 4', 5', 6') available:, iron reinforcement bars (in various sizes), plain iron sheets (in various gauges), tmt bars (steel: 6, 8, 10 mm), iron pipes (all sizes), iron angles (all sizes), false ceilings, iron gates, iron windows (various sizes), winding wire (steel), wall putty (in 25 kg bags), iron nails, telephones, telephone wire, fans

CTN :45176801

27 May, 2026 NA

Dhemaji - Assam

Tender For supply of m and l for wiring for earth wire for two core 6 sqmm pvc insulated unsheathed multistranded copper conductor cable flsh isi marked all as specified and directed , s and f single pole two pin and earth plug and socket complete with one single pole 20a rating mcb complete , supply and install high wall split units indoor outdoor complete with cordless remote control unit 5 star rating and eer 3point2point of capacity 1poin5 tr , supply and fix voltage stabilizer 180v to 300v with output voltage stabilized at 230v with accuracy of plusminus 2 point 5 division and of capacity 4 point zero kva , labour charge ) /bid number : gem/2026/b/7530109 * /dated: 12-05-2026 & & / bid document 1 / 11

Central Government / Public Sector

CTN :45166015

25 May, 2026 NA

Guntakal - Andhra Pradesh

Tender For supply of led based driver and assistant driver desk illumination lamp. technical specification:- 1) operating voltage 18 to 30v dc , with nominal voltage of 24v dc. 2) high and low glow switch has to be provided. 3)the lamp unit shall have in built reverse polarity, over voltage trip, spike & surge protection. 4) mechanically the housing shall be as per clw specification no. clw/es/3/0042 alt d or latest. [warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45139082

29 May, 2026 NA

Dimapur - Nagaland

Tender For tender for supply of all inclusive annual comprehensive maintenance contract , aicmc of following capacity celling mounted air cooled ductable air conditioning unit with high and low side equipments , ducting etc on all days including sundays and holidays including supply and replacement of all defective components as and when required by company sealed items and the same is to be arranged by contractor. all the materials required for replacement in above mentioned air conditioning plant including tools shall be in the scope of the agency and any cost involves in repair of equipment shall be borne by agency. rates is job per unit per month. 22 tr capacity. 1st year. , all inclusive annual comprehensive maintenance contract , aicmc of following capacity celling mounted air cooled ductable air conditioning unit with high and low side equipments , ducting etc on all days including sundays and holidays including supply and replacement of all defective components as and when required by company sealed items and the same is to be arranged by contractor. all the materials required for replacement in above mentioned air conditioning plant including tools shall be in the scope of the agency and any cost involves in repair of equipment shall be borne by agency. rates is job per unit per month. 22 tr capacity. 2nd year , annual comprehensive repair and maintenence of 4.0 tr tower type ac air cooled airconditioner units below five years including supply and replacement of defective compressor by approved make compressor and other defective component , including rewinding of motor pertaining to ac units . all material for replacement , repair and maintenance of voltage stabilizers , replacement of drain pipe , capacitor , relay , thermostat , gas charging etc. complete as reqd. all materials for replacement or rewinding to be arranged by contractor. rates job per unit per month. first year , annual comprehensive repair and maintenence of 4.0 tr tower type ac air cooled airconditioner units below five years including supply and replacement of defective compressor by approved make compressor and other defective component , including rewinding of motor pertaining to ac units . all material for replacement , repair and maintenance of voltage stabilizers , replacement of drain pipe , capacitor , relay , thermostat , gas charging etc. complete as reqd. all materials for replacement or rewinding to be arranged by contractor. rates job per unit per month. 2nd year , running , operation and general maintenance of ductable or tower type ac units with attending complaints or faults or breakdown and taking rectification action for ensuring serviceability or satisfactory working condition of the system , performing preventive maintenance checks , maintenance of records or documentations etc. as per the detailed specifications , terms and conditions cover under this contract on all working days including sunday and holidays. as per terms and conditions specified for maintaining the system by deputing following minimum manpower per day for opration on all days but excluding weekly off in general shift alongwith required tools and plants and sundries etc. complete as required. operator cum mechanic , semi skilled 02 nos. helper unskilled 01 nos.

State Government

CTN :45046874

08 May, 2026 12.36 Lacs

Multi City - Karnataka

Tender For 1)inspection of stator coil for identification of exact no. of the faulty coil and setting up the arrangements for rotor pole coils removing and rotation as per scope of works along with supply of materials and other consumables as per scope of works2)de-brazing the rotor pole terminations and removing the rotor poles (as required). dismantling of rotor poles using suitable and compatible tools, fixtures, and lifting arrangements. ensure safe handling and proper marking for reassemble. rotate and position the rotor appropriately to access the damaged stator coil area.3)remove insulation from both ends of the affected winding section.4)de-brazing of defective coils. 5)driving out the slot wedges carefully remove wedges from stator winding slots without damaging adjacent coils or core.(entire stator winding shall be inspected in case of loose wedges, worn out wedges and missing wedges shall be replaced) along with supply of materials and other consumables.6)insulation removal- remove insulation from both ends of the affected winding sections.7)cutting the coil bindings in both sides. cut the identified damaged winding portion using appropriate tools. carefully pull out the damaged coil from the stator slots without affecting surrounding windings.8)damaged winding cutting- cut the identified damaged winding portion using appropriate tools.9)winding extraction- carefully pull out the damaged coil from the stator slots without affecting surrounding windings. while removing the faulty coils from stator, utmost care should be taken to prevent any damage to stator core.10)removal of faulty coils from the slot.11)slot cleaning and preparation-clean stator inner tooth slots thoroughly. use emery paper to smoothen and maintain uniform slot condition.12)cleaning of carbon deposits/heavy oil content from complete stator coils through co2 cleaning process /dry ice blasting.13)new coil installation-insert new stator coil with proper alignment. fix securely using new wedges of appropriate grade and size.14)brazing of the coil ends.15)re-fixing the rotor poles and connecting them.16)insulation application-apply insulation as per specified class (e.g. class f/ classh). ensure proper curing and finishing.17)complete co2 / dry ice cleaning of stator and rotor.re insertion of removed rotor poles. 18)final checks & testing- insulation resistance (ir) test, high voltage (hvdc) test, continuity check, visual inspection and any other tests which are required (will be carried out by kpcl).19)assembling of removed damper doors and stator covers.20)maintain quality standards throughout the process & use calibrated tools and approved materials.21)presence of the agency during excitation and synchronization of the unit by kpcl.22)safety & quality-follow all safety procedures and ppe requirements

State Government

CTN :45095884

29 May, 2026 NA

Tapi - Gujarat

Tender For supply of various consumables items for emd ii unit 3, 4 & 5, utps. (emd - 5 et-6261) - w963 play safe high voltage tape (50 mm x 0.76 mm x 9.1 mtr) roll, 901 easyclean (nf) 500 ml. spray can - on line electrical contact cleaner., kli - nit ct-2 self spraying type in 350ml can packing, grease gun, wd 40 size 340 gms spray bottle manu hardcastle & waud mfg . co . ltd, crimper plier,self adjustable crimping tools used for 0.25-6.00 sqmm cable end sleeves, led torch, rechargeble torch, puf seal self expanding foam for sealing, measure tape 30 meter, pebble ral 7032 color spray bottle for electrical ht / lt panel, impact wrench power/battery operated, platform truck.size:-60 length x 35 width, allen key set black finish of mm series having sizes 1.5mm ,2mm,2.5 mm ,3mm ,4mm ,5mm ,6mm , 8mm , & 10mm allen keys, hand drill machine size 13mm, feeler gauge: 0.05 - 1 mm, length - 150. size: 0.05 - 1mm step of 0.05mm, 20 leaves, filler gauge set of 26 blades, skf make induction heater model no. tih 100m / 230v for bearing fitting work., hydraulic bearing puller kit, make- skf, model no- tmma 75h/set, width of grip external 52-200 mm, effective arm length - 200 mm, withdrawal force- 75 kn, high speed portable blower,550 w (min.),cap-3.8 m3/minute,16000 rpm,1.7 kg., bosch make hot air gun model ghg 630 dce power input: 2000 watts, temprature range: 50-630 degree c, air flow rate: 150/300/5001/min, weight: 0.73kgs, hss drill bit set 3 mm to 12 mm, high abrasion (12000 abrasion cycles) with cut & mechanical hazard safety hand gloves made from 100 micro foam nitrile coated over breathable hppe thinnest cut resistance shell

CTN :45077014

22 May, 2026 NA

Raipur - Chhattisgarh

Tender For e – tender for the purchase of medical college equipment for directorates of medical education, government of chhattisgarh - barometer (mercury based instruments to be replaced with other alternatives), filter, pasteur chamberland, complete set, filter, berke fed, hydrometres, spirit, hydrometres, milk, hydrometers, wet and dry bulb, incubator, electric (can be procured from microbiology), museum jars, balance analytical 200 gm., balance for weighing food stuff(capacity 2 kg)., centrifuge clinical, weighing machine adult, baby weighing machine, salters baby weighing machine, harpender calipers (for skinfold thickness), height measuring stand, ice lined refrigerator (i.l.r.) (at health centre), dissecting microscope, microscope oil immersion, autoclave (can be shared with pathology/microbiology department), chloroscope, horrock’s apparatus, muac tapes, haemoglobinometer, bp apparatus (digital), stethoscope, kata thermometer, globe thermometer, anemometer, sound level meter, soil testing kit, water sampling bottle from any depth, needle shredder, vaccine carrier, craft water testing kit, protective devices for occupational safety, ear muffs, ear plugs, safety helmet, goggles, safety boots, swine flu kit, gloves, triple layer surgical mask, high efficiency mask, long sleeved cuffed gown, protective eye wear, cap, disposable delivery kit, treatment kits as per national health programs, glucometer, treatment kits as per national health programs, glucometer, first aid kit, spirometer, otoscope, ophthalmoscope, table with marble or stainless steel tops with a minimum size of 6’ x 2’ x3’, tables with marble or stainless steel tops - half standard size, drill machine, hand saw, preferably metal, band saw for sectioning body and limbs, brain knife, mortuary cooler with arrangement to keep 4 body, storage tank to hold 10 cadavers, static/movable, durable tank with input and output, facility with lid, plastic tanks for storing soft and dissected parts, trolley table (steel), x-ray viewing lobby, charts, diagrams, models, slides etc., dissecting instruments for cadaveric dissection, meat cutting machine for thin body sections (trans and vertical) for gross anatomy, sectional study, embalming machine, microscopes, monocular, dissection microscope, microtomes, rotary (optional), microtomes, sledge, large cutting, cabinet for slides (1000), incubators, paraffin embedding bath, hot plates for flattening sections, hot air oven for drying slides (45 oc), refrigerators (minimum 165 litres), marking pencils, articulated skeleton set, bones (dis-articulated) sets, sherrington starling kymograph (electrically driven), myograph stand, inductorium, simple key, short circuiting key, pohl's commutator, vibrating interrupter, muscle trough, muscle lever, muscle grip of femur clamp, hook and weight set, heart lever (simple &starling), enamel tray, low voltage unit for tapping 2 and 4 volts for stimulation, electromagnetic time marker, tuning fork time marker 100 hz and 125 hz 2 each, electrodes, x-blocks, spirit lamps, marey's tambour, microscopes, oil immersion, demonstration eye piece, double demonstration eye piece, stage incubator, westergren's pipette for e.s.r. on stand(with space pipette), wintrobe’s pipette for esr and pcv with stand, perimeter pristely smith s/lp.984 b & t, digital perimeter, hemoglobin-meter sahli's or hellige (with spaces), hemocytometer, sphygmomanometer (digital) (mercury based instruments to be replaced with, suitable, alternatives), stethoscopes, stethoscopes, demonstration with multiple ear pieces, polygraphs, venous pressure apparatus, spirometer, ordinary, digital spirometer, gas analysis apparatus, halden's student type, van slyke's apparatus manometric, gas analyser automatic for co2, o2, n2, douglas bag, complete, basal metabolism apparatus, mosso'sergograph, clinical thermometer (mercury based instruments to be replaced with suitable, alternatives), compass aesthesiometer, thermo-aesthesiometer, algometer, ap

Electric Discharge Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government / Public Sector

Central Government/Public Sector

State Government

State Government